PRESSURE GAUGES ....
1) INDUSTRIAL PRESSURE GAUGES
"OSMADIAL
/ SCIECON" pressure gauges are ideal for Chemicals
& fertilizers plants, Refineries, Thermal power stations
and where pressure gauges are installed outdoor and in field
services.
| Case |
: |
Cast aluminum black IP – 55 weather
proof case |
Model No. :
IPG - 305
 |
| Dial size |
: |
100mm Ø,150mm Ø
and 200mm Ø |
| Range |
: |
760 mm Hg to upto 400 Kg/cm2 Pressure,
Vacuum and Compound |
| Element |
: |
SS 316 Bourdons tube |
| Movement |
: |
Brass / SS Movement |
| Mounting |
: |
Direct, Surface & Panel mounting |
| |
|
|
| |
|
|
| |
|
|
|
2) RECEIVER PRESSURE GAUGE
"OSMADIAL / SCIECON"
pressure gauge is a Pneumatic receiver indicator suitable
for input signal of Range 0 to 100% Linear operated between
1.2 to 1kg / cm 2.
Model
No. : RG - 310
 |
Dial size |
: |
100mm Ø, 150mmØ |
| Case |
: |
Cast aluminium black finished
IP-55 weatherproof case |
| Element |
: |
S.S 316Bourdon tube. |
| Movement |
: |
Brass / S.S Movement. |
| Mounting |
: |
Direct /Surface / Panel Mounting. |
| Connection |
: |
3/8” , ½”
BSP / NPT / (M) Connection at bottom / back entry |
| |
|
|
| |
|
|
| |
|
|
|
3) DIFFERENTIAL PRESSURE GAUGE
"OSMADIAL / SCIECON"
Differential pressure gauge consists of diaphragm made of
SS 316 \ Spring Sheet , clamped with gasket in between two
chambers namely highly pressure and low Pressure chambers
Pressure acts on both surfaces of diaphragm through inlet
port of high chamber and low chambers respectively. As the
both high and low pressure acts on opposite Side of diaphragm
, cause a relative movement in diaphragm depending on pressure
differences of two sides of the diaphragm and this relative
movement in diaphragm varies against Respective pressure differences
and the movement of the diaphragm is transferred to the pointer
Mechanism through torque tube mechanism, lever , linkage and
gearing assembly.
APPLICATION
:
For monitoring filter efficiency , measuring differential
pressure ,flow along with plate ,venturi etc.
| Dial size |
: |
150mmØ |
Model
No. : DFG - 309
 |
| Range |
: |
o to up to 600mm WC |
| Process Connection |
: |
¼” NPT (F) standard, or
as required |
| Mounting |
: |
Direct bottom screw connection or as
required |
| |
|
|
| |
|
|
| |
|
|
|
4) GLYSERINE FILLED PRESSURE GAUGE
"OSMADIAL
/ SCIECON" pressure gauges are ideal where pressure
gauges are subjected to severe conditions .The filled liquid
protects the internal parts against vibrations and also lubricates
and protects from environmental conditions.
Model
No. : GFG - 307
 |
Case |
: |
Cast aluminum black IP
– 55 weather proof case |
| Dial size |
: |
100mm Ø,150mm
Ø and 200mm Ø |
| Range |
: |
760 mm Hg to upto 400 Kg/cm2
|
| Element |
: |
SS Bourdons tube |
| Connection |
: |
3/8”, ½”
BSP / NPT (M) bottom / back connection made from Brass
or SS rod |
| Mounting |
: |
Direct, Surface &
Panel mounting |
| |
|
|
| |
|
|
| |
|
|
|
5) SEALED UNIT TYPE DIAPHRAGM GAUGE
"OSMADIAL
/ SCIECON" pressure gauge is recommended where
the fluid is highly corrosive, contaminated, viscose or liable
to crystallize inside the system. Diaphragm seals are the
separations stage between medium and gauge .The gauge above
the diaphragm seal is filled with Silicon Oil, which transmit
the pressure acting on diaphragm to the bourdon tube. The
gauge and diaphragm seal can be separated with capillary tube
up to 5Mtr in length.
| Case |
: |
Cast aluminium , stove enamel black
finished case Direct mounting |
Model
No. : SUG - 308
 |
| Dial size |
: |
100mm Ø,150mm Ø |
| Range |
: |
0 to upto 100kg /cm2 |
| Diaphragm |
: |
Spring Steel diaphragm , covered on
Teflon Foil at lower portion |
| Bottom chamber |
: |
Cast iron bottom chamber |
| Connection |
: |
½” BSP / NPT (M) bottom
connection |
| Elements |
: |
Stainless Steel bourdons tube |
| |
|
|
| |
|
|
| |
|
|
|
|
|
